End of life · Availability on request

MorphoAccess® 100 Series

Identify an installed MA 100, MA 110 or MA 120 D fingerprint access reader.

The terminal can identify a user by fingerprint at the door. MA 110 and MA 120 D versions also read contactless cards. Share the model on the rear label so Biotime can check availability and replacement options.

Front view of the Sagem MorphoAccess 100 Series terminal with its illuminated fingerprint sensor.

MA 100 Series in figures

Identification capacity

500 users

The local database supports two enrolled fingerprints per person. Check the enrolment records before moving an existing door to another reader.

Fingerprint capture

500 dpi optical resolution

The integrated MorphoSmart CBM sensor captures a 14 × 22 mm fingerprint area.

Card verification

< 1 s one-to-one verification

The manufacturer’s figure covers detection, coding and matching for a claimed identity. Door opening and passage time are additional.

Maintaining an existing fingerprint-controlled door

Staff entrances. On an MA 100, employees present a finger and the terminal searches its database. For a service enquiry, identify the door, note how many people use it and record whether enrolment is managed locally or over the network.

Sites with badges. MA 110 and MA 120 D add different card technologies. Confirm the badge family at the site before sizing a replacement, especially when several generations of doors share the same credentials.

Replacing a reader. Record the wiring interface, mounting space and available power. At an exposed doorway, include a photo of the shelter and cable route so the team can assess a suitable replacement.

A person presents a finger at a wall-mounted MorphoAccess 100 Series terminal in an office corridor.

Technical specifications

Model and credential

MA 100 supports fingerprint identification. MA 110 adds HID iCLASS. MA 120 D supports MIFARE or DESFire according to the card configuration. Identify the exact suffix on the device.

Controller interfaces

The manufacturer lists Wiegand output, RS485, Clock & Data and 10/100 Ethernet. Check the configured interface and format on the existing controller.

Housing and installation

The series has an IP53 rating and is intended for indoor or sheltered outdoor mounting. Its published dimensions are 142 × 84 × 46 mm.

Planning a replacement

Check with Biotime whether the exact reference is still available. For a current compact fingerprint reader, compare SigmaTouch Go and review mounting, badge support and controller compatibility together.

Get a project quote

Add the installed model and quantity to your quote list. Include the label reference and card technology so our Dubai team can check remaining availability or assess a suitable replacement.

© Copyright 2026. Biotime Biometrics. All rights reserved. Design by Iziweb Consulting