IDEMIA · Contactless fingerprint access

MorphoWave XP2

Contactless fingerprint access for busy entrances.

One hand movement captures four fingerprints. Use MorphoWave XP2 at doors, turnstiles and speed gates where users need to authenticate without stopping to touch a sensor.

IDEMIA MorphoWave XP2 contactless fingerprint reader

Why specify MorphoWave XP2?

Keep people moving

Up to 50 users per minute

IDEMIA rates scan and verification time at under one second. Test throughput with your gate cycle and traffic patterns.

Guide users at the reader

4.3-inch colour touchscreen

Show users the access result at the reader. Enable PIN entry or on-device time and attendance where required.

Choose how users authenticate

1:N or multifactor

Identify users by fingerprint or configure multifactor authentication. MIFARE/DESFire are standard. Check HID and mobile credential options and licences.

For doors, turnstiles and speed gates

Commercial buildings Use XP2 at staff entrances and lobby speed gates. Check where users can approach and clear each lane.

Industrial sites Plan for shift changes. Check the mounting position and test the reader during a typical peak.

Restricted areas Confirm which entry points require a card, mobile credential or PIN in addition to a fingerprint.

IDEMIA contactless readers in use at a bank of access gates

Technical specifications

Controller and power

Access control: OSDP and Wiegand.
Communications: Ethernet and RS‑485.
Power: PoE+ or 12–24 V DC.

Confirm controller support and enrolment software before ordering.

User capacity

40,000 user records as standard for one-to-many identification.
Up to 100,000 with licences.

Confirm the configuration if you need higher capacity or additional credential types.

Installation conditions

IP65 enclosure. For outdoor installations, shield the sensor from direct sunlight and rain.

Check operating conditions and mounting in the technical brochure.

Replacing XP or Compact?

Send the part number of your MorphoWave XP or Compact and a photo of the installation. Check the mounting, power and controller before specifying a replacement.

XP2 references: 293809715 (MD) and 293817486 (MDI-M).

Get a project quote

Choose a quantity and add XP2 to your quote list. Include your site, number of entry points and any credential requirements when you send the list to our Dubai team.

Category:
© Copyright 2026. Biotime Biometrics. All rights reserved. Design by Iziweb Consulting